Curing Process For Hypertufa

Hypertufas are primarily created as planters and garden ornaments as they definitely are extremely light-weight and tough, being able to tolerate overwhelming winter conditions, as opposed to those that are made from concrete. Hypertufas can be simply done by anyone on their own house, utilizing household things, given that they have the appropriate ingredients. However, to be able to successfully build one for your garden, you must do as instructed properly as a small mistake could gravely have an impact on the finished product of your project. One of the most important stage in the creation of hypertufas is the curing process as it will essentially determine if your project is a failure or success.

The curing process in creating hypertufas begins soon after applying the mixture to the mold. Always keep in mind that if you want for your mixture to stay intact in the mold, you have to make certain that it has a good quantity of moisture. As a result wind breezes are hazards when creating hypertufas as it can rob the moisture off your mixture. Therefore it is smart to work in sheltered areas to avoid breezes.

Another significant step in curing your hypertufa is putting it in a plastic or trash bag. The reason for this is to make sure that your wet hypertufa is secure from outside factors like wind and debris. What's more, it seals in the moisture so that your creation will not fall apart. Right after about one to three days, look at your creation by scratching it with your fingernail; if it cannot be scratched with your fingernail anymore, you may then already remove the mold off your creation. You can smoothen the rough sides or include texture to your hypertufa by using a wire brush but you still need to be careful since it is still sensitive.

Soon after extraction of the mold, put your creation once more in the plastic or trash bag and leave it in an area where it will not be disturbed or meddled with. You must also maintain the moisture of your hypertufa by occasionally misting it with water. Depending on the size of your project and the humidity and temperature of the location, the curing procedure could take for around a month for it to be fully dried and usable. You’ll know that your hypertufa is thoroughly cured once it produces a hollow sound whenever you knock on it.